pencil post bed
I am building a table saw jig for making 80" long tapered posts from an article in woodsmith no. 153 2004 and have the front the rear pivot blocks made and the indexing block.In the drawing it shows...
View ArticleQuestion about zero clearance insert for Porter Cable Jobsite table saw.
So far I have not been able to find a zero clearance throat plate for this saw or for that matter, any information on making one. I understand a jobsite saw is used mainly for cutting 2x4's so zero...
View ArticleStorage of finisd product
I am building keepsake boxes in small runs and after they are done and finished (wipe on poly) what would the best way to store them to control the wood movement ? Left unwrapped and opened to the...
View Articlecurved coves
would appreciate any advice on how to approach making a 4"radius cove on an inside curve with the radius around 85" total length under 4". I do not have a shaper.
View Articlepower sources
I just wanted to know if anyone uses 3-phase power tools on phase converters or rotary phase converters?I found a great deal on some older 3-phase equipment and I've seen these converters made by...
View ArticleClik here to view.
How to attach custom panels to stand-alone fridge doors? Hinge supplier?
Help! We're having trouble with our Italian kitchen-makers here in Turin, Italy to attach the custom wood panels (matching all the kitchen cabinets) to a standard double-door "American" refrigerator...
View ArticleWhich Table Saw
I am getting ready to step up to a 3hp table saw. I narrowed it down to Saw Stop Professional or Powermatic 2000 52'' saws. My main concerns are table flattness, trunion strength and tolerence, and...
View ArticleFinishing Port Orford Cedar
I recently completed an Adirondack chair (original, right?) using Port Orford Cedar. The slats on the seat and back were staind w/ an oil based product. The arms and legs I have primed then painted...
View ArticleSatinwood Banding
I want to make a piece of Mahogany furniture and outline the top and edge of the drawer fronts with Satinwood. The inlay/edging will be 3/4-1in wide with the grain being crossgrain. I can not find any...
View Articleclamping wood at a 75 degree angle
I am making a childs cradle which has four sides that are angled out at 75 degrees. I need to glue them together but my question is how to clamp them together while they are drying? Do i make a jig...
View ArticleCheap Kitchen Sale Leeds
Cheap Kitchens Sale Leeds www.solidwoodkitchen.co.uk. Cheapest Kitchens with appliances £595. TEL-01616-694785. Cheap Kitchens Sale Leeds
View ArticleNew Kitchen Lancashire
New Kitchen Lancashire Try looking at www.solidwoodkitchen.co.uk. They have some amazing designs and prices. New Kitchen Lancashire __________________ http://www.uknewkitchens.co.uk
View ArticleNew Kitchen Salisbury
New Kitchen Salisbury Try looking at www.solidwoodkitchen.co.uk. They have some amazing designs and prices. New Kitchen Salisbury __________________ http://www.uknewkitchens.co.uk
View ArticleQuestion about zero clearance insert for Porter Cable Jobsite table saw.
So far I have not been able to find a zero clearance throat plate for this saw or for that matter, any information on making one. I understand a jobsite saw is used mainly for cutting 2x4's so zero...
View ArticleStorage of finisd product
I am building keepsake boxes in small runs and after they are done and finished (wipe on poly) what would the best way to store them to control the wood movement ? Left unwrapped and opened to the...
View Articlecurved coves
would appreciate any advice on how to approach making a 4"radius cove on an inside curve with the radius around 85" total length under 4". I do not have a shaper.
View ArticleKitchen Sale Brighton
Kitchen Sale Brighton. Try looking at www.kitchendesign1.co.uk They have some amazing designs and prices. Kitchen Sale Brighton _________________Kitchen Sale Brighton
View ArticleBudget Kitchen Units Northampton
Budget Kitchen Units Northampton Try looking at www.kitchendesign1.co.uk. They have some amazing designs and prices. Budget Kitchen Units Northampton __________________ http://www.kitchenunits7.co.uk
View ArticleQuestion about zero clearance insert for Porter Cable Jobsite table saw.
So far I have not been able to find a zero clearance throat plate for this saw or for that matter, any information on making one. I understand a jobsite saw is used mainly for cutting 2x4's so zero...
View Article